|
Shanghai Bank Glass sensor doorInstallation, Repair and Maintenance Zitin Center ( www.zitin.com/blgym ), serving Minsheng Bank, Bank of Communications, Industrial Bank, Agricultural Bank of China, Xiamen International Bank and many others - the after-sales repair and maintenance of bank glass sensor doors. When the Zitin editor saw the post below, we were speechless!
Today I accompanied a friend to an ATM to withdraw money. Everyone k**s the kind ofGlass sensor door banks have. My friend was in line, and with nothing to do, I tested the reaction of theGlass sensor door. As the door was about to close, I stupidly stuck half my head in, and as you can guess, my head got stuck. Only then did I realize that the door was actually button-operated. Gosh, who invented this? Never mind, enough said - it's too sad to go on...
In a case like the above, the bank either did not install anti-pinch protection, or his head was outside the anti-pinch zone... anyway, that's on him! Of course, how to avoid this from happening? Use sensor doors for both entry and exit, and add anti-pinch protection!
When a moving object approaches the door, it opens and closes automatically; this kind of door is called aGlass sensor door. TodayGlass sensor door glass sensor doors are increasingly widely used in office buildings, factories, supermarkets, airports and other places.
Glass sensor doorA glass sensor door mainly means that the door opening/closing control system is realized by sensing methods. By sensing method it can be divided into infrared glass sensor doors, microwave glass sensor doors, card-swipeGlass sensor door, touch-typeGlass sensor door glass sensor doors, etc.; glass sensor doors are further divided into slidingGlass sensor door and swingGlass sensor door - sensing is one opening mode of glass sensor doors. By manufacturing process, glass sensor doors are divided into framed doors and frameless doors. The door body generally uses tempered glass, stainless steel sheets, color-coated steel sheets, or some special materials.
As everyone k**s, in recent years the glass sensor door introduced by Shanghai Zitin - taking the sliding type as an example - is a kind of glass door widely used in shops, hotels, enterprises and **s. Its most direct feature is that it opens automatically when a person or object approaches; when only an object approaches, it does not open.Glass sensor door Glass sensor doors can be roughly divided into sliding, revolving and push-pull types; among them, the sliding and revolving types are most suitable for installing sensors. Based on the environment and requirements of theGlass sensor door installation, we can consider choosing theGlass sensor door configuration as follows.
1) Choice of sensor: in upscale hotels and office buildings, high-sensitivity sensors can be chosen; in places with frequent foot traffic such as banks and shops beside sidewalks, narrow-zone microwave sensors should be chosen (sensors are adjustable).
2) Safety auxiliary devices: in upscale hotels and similar places where pinching incidents must be avoided, anti-pinch infrared sensors can be installed.
3) Equip with backup power: to ensure the glass sensor door works normally during a power outage, a backup power supply can be provided.
How to maintain Shanghai bank glass sensor doors? Bank glass sensor doors are ** increasingly common; many shopping malls and hotels choose glass sensor doors to enhance their image and increase traffic flow. Below, Shanghai Zitin explains in detail the maintenance methods and daily **s for bank glass sensor doors.
Daily maintenance methods for Zitin bank glass sensor doors:
To check whether problems have appeared with the bank glass sensor door, start by observing the door body, carefully checking the door sill for scratches, whether the gaps between door leaves have changed, and whether any equipment shows signs of corrosion - these are points we must inspect carefully. For the bank glass sensor door to operate normally, cleanliness is key, so there should not be too much dust or debris near it, as these will affect its normal use.
After the bank glass sensor door has been used for a while, clean its operator housing. The housing accumulates dust during operation, which can cause problems, so cleaning is important; regular cleaning also effectively extends the service life of the bank glass sensor door. Always note: whether cleaning or repairing the bank glass sensor door, always turn off the power first so the work can be done safely.
The coordination of the parts during operation of the bank glass sensor door is important; for the door to open and close, floor rollers are used, so we must maintain and regularly inspect these over the long term, preventing hidden faults and avoiding rust stains.
Daily ** methods for Zitin bank glass sensor doors:
1. At a normal walking speed, the inspector approaches the bank glass sensor door from outside or inside; the door should open automatically, and its movement should be smooth without collision. After the door opens, when the person passes slowly through the bank glass sensor door at about 1**mm-**mm per second, the door should remain open;
2. After the inspector leaves the detection zone of the bank glass sensor door's sensor, following a delay of 1-10 seconds (the duration can be set via the door's opening/closing parameters), the bank glass sensor door should close automatically, with smooth movement and no collision;
3. Observe the normal walking route of people passing through the bank glass sensor door; the daily route should be adjusted so that people approach the bank glass sensor door head-on rather than at an angle;
4. When approaching the bank glass sensor door, the sensing width range of the sensor should be greater than the fully opened width of the door;
5. If the bank glass sensor door is equipped with an auxiliary safety light sensor (infrared through-beam protection), while the door leaf is open and a person stands still, covering the auxiliary safety light sensor by hand should keep the door open; within a few seconds after the hand is removed, the door should close again.
Shanghai Bank Glass Sensor Door Project - Zitin System SolutionConsultation Tel: +86 21 68568185www.zitin.com
Shanghai Bank Glass Sensor Door Project - Zitin System SolutionConsultation Tel: +86 21 68568185 www.zitin.com
Shanghai Zitin Bank Glass Sensor Door Company is located in Building 1 of the National University Science Park of the University of Shanghai for Science and Technology, 128 Xiangyin Road, Shanghai. The company specializes in bank glass sensor door systems, integrating sales and engineering with glass sensor door systems as its leading business. For many years Zitin has upheld the business philosophy of ¡°integrity first, ** first, service first¡±, and with modern management, ** products and satisfactory service, we look forward to sincere cooperation with you. Zitin is the Shanghai ** for Panasonic glass sensor doors and operates a Shanghai Panasonic Glass sensor door Exclusive Store,(Room B328, 2nd Floor, Chengda Building Materials Mall, 1205 Jungong Road), Zitin cooperates with many European imported brand manufacturers and has a ** ** Gear Glass sensor door Brand Zitin strives to build the ¡°** yet affordable¡± glass sensor door philosophy; ensuring that Shanghai, as a world financial center, has access to affordable upscale glass sensor doors is our unchanging goal!
Shanghai Bank Glass sensor door Installation, Repair and Maintenance Zitin Center ( www.zitin.com/blgym +86 21 68568185£© |
Current Location: Home >
