How to Carry Out Acceptance Inspection of Automatic Door and Sensor Door Projects Shanghai Zitin Design, Installation & Repair Center Hotline: +86 21 68568185
Automatic Door Engineering of Acceptance
The types and dimensional specifications of the automatic door profile frames and accessories, sensor devices and glass must comply with the design requirements and the current national ** standards. Door components must be firmly connected, and the structure must have sufficient strength and rigidity to ensure sensitive opening and closing. The installation positions of the automatic door side frames, lintel track and lower track must be correct, firm and reliable; the mounting position of the sensor devices, their connection method, the opening direction and the detection range of the detector must comply with the design requirements and the relevant industry standards.
The selected parts and accessory materials, unless made of stainless steel or corrosion-resistant materials, must be given rust- and corrosion-proof treatment. Contact corrosion of aluminum alloy profiles is strictly prohibited.
Inspection method: visual **.

 

 

The appearance ** of automatic doors must comply with the following requirements.

Pass: the surface is free of damage and performance-affecting defects; local scuffs and scratches must comply with the relevant standards; there must be no obvious color difference between the colored surfaces of adjacent door components; the door surface must be free of metal chips, burrs, corrosion spots and other stains; the gaps between the leaves and the frame are uniform.
Excellent: the surface is free of damage and performance-affecting defects, with no scuffs or scratches; the surfaces of adjacent components are uniform in color, with smooth and even chamfers. The door surface is free of metal chips, burrs, corrosion spots and other stains, without wavy reflection, and the gaps between the leaves and frame are uniform.

The installation of automatic door accessories must comply with the following requirements:

Pass: installed in the correct, complete and firm position, each functioning as intended, with sufficient strength, flexible opening and closing, and free of contamination.
Excellent: installed in the correct, complete, firm and plumb position, each functioning as intended, with sufficient strength, flexible opening and closing, clean, attractive and free of contamination.

 

Automatic Door Engineering of Acceptance
The application of glass sealant on automatic doors must comply with the following requirements:
Pass: the sealant joints are flat, with no obvious traces at the joints, and free of contamination.
Excellent: the sealant joints are flat and smooth, with no traces at the joints. The area around the joints is clean and free of contamination.
Inspection method: visual **.