|
Shanghai Bank Sensor Electric DoorInstallation, Repair and Maintenance Zitin Center ( www.zitin.com/gyddm +86 21 68568185), Minsheng Bank, Bank of Communications, Industrial Bank, Agricultural Bank of China, Xiamen International Bank... ..., providing repair, maintenance and after-sales service for bank sensor electric doors. When the Shanghai Zitin editor saw the following post, he was speechless!
Today I accompanied a friend to the ATM to withdraw money. Everyone k**s that kind of bank Sensor Electric Door. My friend was in line, and I had nothing to do, so I tested the reaction of the Sensor Electric Door outside the door. When the door was about to close, I stupidly stuck half my head in, and as a result... ... you k**, my head got stuck. Only then did I realize that the door was button-operated. Damn, who invented this? Never mind, never mind, it's all tears...
In a case like the above, the bank either did not install anti-pinch protection, or his head was outside the anti-pinch zone... anyway, he was quite something! Of course, how to avoid this: use sensor doors for both entrance and exit, and install anti-pinch protection!
When a moving object approaches the door, the door opens and closes automatically; this kind of door is called a Sensor Electric Door. Nowadays, Sensor Electric Doors are increasingly widely used in office buildings, factories, supermarkets, airports and other places.
A Sensor Electric Door mainly refers to a door whose opening/closing control system is realized by sensing. According to the sensing method, it can be divided into infrared sensor electric doors, microwave sensor electric doors, card-swipe Sensor Electric Doors, touch-type Sensor Electric Doors, etc. Sensor electric doors are further divided into sliding Sensor Electric Doors and swing Sensor Electric Doors; sensing refers to one of the opening modes of sensor electric doors. Sensor electric doors are further classified by manufacturing process into framed doors and frameless doors. The door body generally adopts tempered glass, stainless steel plate, color steel plate, or some special materials.

As everyone k**s, in recent years the sensor electric door introduced by Shanghai Zitin Company - taking the sliding type as an example - is a kind of glass door widely used in shops, hotels, enterprises and public **s. Its most direct feature is that it automatically opens when a person or object approaches. When an object approaches, the door does not open. Sensor Electric Doors can be roughly divided into sliding, revolving and sliding-folding types. Among them, the sliding and revolving types are most suitable for installing sensors. According to the environment and requirements of installing a Sensor Electric Door, we can consider the configuration of the Sensor Electric Door as follows.
1) Choice of sensor: in ** hotels and office buildings, high-sensitivity sensors can be chosen; in places where people often pass by, such as banks and shops beside sidewalks, choose narrow-zone microwave sensors (sensors are all adjustable).
2) Safety auxiliary devices: in ** hotels and other places where sensor-related pinching incidents must be eliminated, anti-pinch infrared sensors can be installed.
3) Equip with backup power: to ensure the sensor electric door works normally even during a power outage, it can be equipped with a backup power supply.

How to maintain and service Shanghai bank sensor electric doors? Bank sensor electric doors are ** increasingly common; many malls and hotels choose sensor electric doors to enhance their corporate image while increasing traffic volume. Below, Shanghai Zitin explains in detail the maintenance methods and daily ** of bank sensor electric doors.
Shanghai Zitin's daily maintenance methods for bank sensor electric doors:
To check whether the bank sensor electric door has problems, we can start by observing the door body: carefully observe whether the door body and threshold have scratches and other issues, whether the gaps between door leaves have changed, and whether various equipment shows signs of corrosion. These are all areas we need to check carefully. For the bank sensor electric door to run normally, cleanliness is key; therefore, there should not be too much dust or debris near the bank sensor electric door, as these will affect its normal use.
After the bank sensor electric door has been used for a period of time, we need to clean its operator housing. The housing accumulates a lot of dust during operation, and this dust will cause problems with the bank sensor electric door during use, so cleaning is very important. At the same time, regular cleaning will effectively extend the service life of the bank sensor electric door. Also, it must be noted that whether cleaning or repairing the bank sensor electric door, the power must first be turned off so that work can be carried out safely.
The coordination between components is very important when the bank sensor electric door is running; just as the bank sensor electric door uses floor rollers to open and close, we must provide long-term maintenance and regular ** of these parts, so that the bank sensor electric door has no hidden fault risks, and rust can also be avoided.

Shanghai Zitin's daily ** methods for bank sensor electric doors:
1. The inspector walks toward the bank sensor electric door from outside or inside at a normal speed; the bank sensor electric door should open automatically, and its movement should be smooth without collision. After the bank sensor electric door opens, when a person passes through slowly at about 1**mm-**mm per second, the bank sensor electric door should remain open;
2. After the inspector leaves the sensor detection zone of the bank sensor electric door, after a delay of 1-10 seconds (the duration can be set by the bank sensor electric door's switch parameters), the bank sensor electric door will close automatically, and its movement should be smooth without collision;
3. Observe the walking route of people normally passing through the bank sensor electric door; the daily walking route should be adjusted so that people walk straight toward the bank sensor electric door rather than at an angle;
4. When walking toward the bank sensor electric door, the sensing width range of the bank sensor electric door sensor should be greater than the fully opened width of the door;
5. If the bank sensor electric door is equipped with an auxiliary safety light sensor (infrared through-beam protection device), when the bank sensor electric door leaf is open and a person stands still, cover the auxiliary safety light sensor by hand; the door should remain open. Within a few seconds after the hand is removed, the door should close again.

Shanghai bank sensor electric door project, Zitin system solutionConsultation Tel: +86 21 68568185www.zitin.com
Shanghai bank sensor electric door project, Zitin system solutionConsultation Tel: +86 21 68568185 www.zitin.com
Shanghai Zitin bank sensor electric door company is located in Building 1, National University Science Park of USST, 128 Xiangyin Road, Shanghai. The company specializes in bank sensor electric door systems, integrating sales and engineering, with sensor electric door systems as its leading project. For many years, Zitin has adhered to the business philosophy of "integrity first, ** first, service first," and always looks forward to sincere cooperation with you through modern management, ** products and satisfactory service. Zitin is the Shanghai ** for Panasonic sensor electric doors, and has a Shanghai Panasonic Sensor Electric Door Exclusive Store (Room B328, 2nd Floor, Chengda Building Materials Mall, 1205 Jungong Road). Zitin cooperates with many European imported brand manufacturers and has a ** ** Gear Sensor Electric Door Brand. Zitin strives to build the business philosophy of "premium yet affordable" sensor electric doors; it is our unchanging goal to give Shanghai, as a world financial center, access to affordable ** sensor electric doors!
Shanghai Bank Sensor Electric Door Installation, Repair and Maintenance Zitin Center ( www.zitin.com/gyddm +86 21 68568185)
|