Shanghai automatic door maintenance - daily maintenance and ** maintenance content Hotline: +86 21 68568185 www.zitin.com
How should automatic doors be maintained? Automatic doors are becoming increasingly common, and many shopping malls and hotels choose revolving doors to enhance their corporate image while increasing passenger flow. Below, Shanghai Zitin Automatic Door explains in detail automatic door maintenance methods and daily **.
Daily maintenance methods for automatic doors:
When inspecting an automatic door, start by examining the door body: carefully check the threshold for scratches, whether the gaps between door leaves have changed, and whether any components show signs of corrosion. These all deserve close **. Cleanliness is key to keeping an automatic door running properly, so the area around the door should be kept free of dust and debris, which can interfere with normal operation.
After an automatic door has been in use for a while, its operator cabinet needs cleaning — dust builds up during operation and can cause problems, so keeping it clean is essential. Regular cleaning also effectively extends the service life of the door. Importantly, whenever cleaning or repairing an automatic door, always switch off the power first for safe work.
During operation, the coordination of all components matters — for example, opening and closing the automatic door relies on the floor rollers, so these need long-term care and regular ** to prevent latent faults and avoid rust stains.
Daily ** methods for automatic doors:
1. The inspector walks toward the automatic door from outside or inside at a normal pace; the door should open automatically and move smoothly without any collision. Once the door is open, as the person passes slowly at about 1**-** mm per second, the door should stay open.
2. After the inspector leaves the sensor's detection zone, the door should close automatically after a delay of 1-10 seconds (the delay can be set via the door's open/close parameters), and the closing motion should be smooth without collision.
3. Observe the normal walking path through the door; the daily path should be adjusted so that people walk straight toward the door rather than approaching at an angle.
4. When approaching the door, the sensor's detection width should be greater than the fully opened door width.
5. If the door is fitted with an auxiliary safety light sensor (infrared through-beam protection), while the door leaf is open and the person stands still, blocking the auxiliary safety light sensor by hand should keep the door open; within a few seconds after the hand is removed, the door should close again.
Professional automatic door maintenance content
Because automatic doors are affected by installation ** and the operating environment, problems inevitably arise during use. If maintenance is neglected for a long time, hidden hazards and minor faults go unaddressed, growing into major failures that can ultimately paralyze the automatic door.
Contractors generally need to provide the following types of maintenance for automatic door users:
Clean oil stains and dust inside the operator housing.
Check the wear of various automatic door components, and check the support alignment deviation and screw tightness.
Check belt tension.
Check the controller's motor output, open/close width, speed, braking and other functions.
Check whether the voltage parameters are normal.
Repair or replace damaged components.
For details, see: http://www.zitin.com/product/product_list.asp?clsID=85
Shanghai automatic door maintenance- Zitin Repair & after-sales service Center , Consultation Telephone400-690-8875
Automatic door maintenance is divided into in-warranty maintenance and out-of-warranty maintenance. After the free service period ends, the user should be notified promptly and an Automatic Door Warranty & Maintenance Service Contract should be signed with the user.
Shanghai automatic door after-sales service - ** automatic door (sensor door, sliding door, curved door) repair, upkeep and maintenance content
-- Provided by Shanghai Zitin Technical Service Center for world-class premium automatic door brands
1. Repair, upkeep and maintenance of the transmission part of automatic doors and sensor doors
a. Inspect, adjust and replace the motor unit.
b. Inspect and adjust the tensioner unit.
c. Inspect and replace worn tensioner pulleys.
d. Inspect and adjust the belt fixing device.
e. Inspect and adjust belt tension.
f. Inspect belt wear and replace as needed.
g. Inspect and adjust the brake.
h. Inspect the brake rubber pad and replace as needed.
2. Repair, upkeep and maintenance of the hanging part of automatic doors and sensor doors
a. Inspect and tighten the motor housing.
b. Clean and inspect the track.
c. Inspect and adjust the roller assembly.
d. Inspect roller wear and replace as needed.
e. Inspect and adjust the anti-drop stabilizer clearance.
f. Inspect the anti-drop pad wear and replace as needed.
g. Inspect and adjust the anti-sway guide.
h. Inspection and replacement of anti-sway shims.
3. Repair, upkeep and maintenance of the control part of automatic doors and sensor doors
a. Inspect, adjust and replace sensors.
b. Inspect, adjust and replace the controller.
c. Inspect, adjust and replace the function expansion module.
d. Inspect, adjust and replace the electric lock.
e. Inspect, adjust and replace the power terminal block.
f. Inspection, adjustment and replacement of electrical wiring.
4. Automatic door sensor door Whole Machine Repair Maintenance and Care
a. Adjust the door opening/closing speed.
b. Adjust the slow-down speed.
c. Adjust the opening hold-open time.
d. Check and adjust the sensor detection range.
e. Adjust the manual open/close resistance of the door leaf.
f. Adjustment for smooth door leaf operation.
Shanghai automatic door maintenance- Zitin Repair & after-sales service Center
After-sales Service
**ofAutomatic door sensor door**serviceandtechnologyShanghai Zitinof, ProjectscompletesystemofandreliableforAbout Uscustomersofbusinessimportant, About Usofautomatic doorprojectmaintenance, Sensor door repairserviceflexible, of**andguarantee.
Maintenance & repair team
specializedofcustomersserviceteam, sensor doorprojectmaintenance, Automatic door repairprovide**oftechnologypersonnelguarantee.
Fault response
Zitin customer service will dispatch technicians according to the fault level and urgency. No. Fault Level Symptom P1 Critical Entire system down P2 Major Fault seriously affects system operation P3 Moderate Fault affects efficiency but the system still runs P4 Minor Some secondary functions have failed
Maintenance and repair service within the warranty period
Except for human factors (such as mechanical damage) and other force majeure (such as earthquakes and floods), we provide maintenance and warranty service for all equipment supplied by our company, with a maintenance and warranty period of one year. During the warranty period, all maintenance, repair or replacement of automatic doors and sensor doors is free of charge.
Maintenance and repair service after the warranty period
All equipment supplied by Shanghai Zitin is covered by lifetime maintenance and repair service from our company; however, after the warranty expires, a certain maintenance and repair cost for sensor doors and automatic doors will be charged, or a separate Automatic Door Maintenance Contract must be signed with our company.
Regular maintenance and **s
Shanghai Zitincanaccording tocustomersofneedcarry outofAutomatic door sensor door, e.g.etc., provide**of, Bycustomersin timeprojectequipmentof, customersbusinessof.
Customer training
We firmly ** that providing technical training within customers' sensor door and automatic door projects is essential, and it is an important part of Zitin's automatic door and sensor door maintenance and repair services.
Panasonic authorized distributor certificate, specialty store certificate and technical service center certificate for automatic door hardware
Shanghai Panasonic automatic door authorized distributor, the only specialty store, technical service center:
www.panasonic-autodoor.com www.zitin.com/panasonic
Shanghai Zitin automatic door control division
Automatic Door Control Division, with intelligent door-control systems (Automatic Revolving Door、Automatic Sliding Door、Medical doors, airtight doors、Emergency escape automatic door、Villa automatic gate openeretc.Automatic Sensor Door、Access Control System) and door-control system hardware (Door Closer、Floor Spring、Door Clamp, etc., andDoor Control Small Hardware) as its main business, together with a ** installation team. It is a leader in Shanghai's door control industry, working alongside imported brands and well-k**n ** brands (such as:Panasonic,DORMA,GEZE,Besam,Record,Stanley,GU,BFT,GMT,Tiansuo etc.) cooperation, we have many engineering partners in decoration, curtain walls and **.
Main products of the Zitin Door Control Division:
Panasonic door control hardware Shanghai **, the only specialty store in Shanghai www.zitin.com/panasonic
DORMA door control system Shanghai Exclusive:www.zitin.com/dorma
European original-import villa/courtyard gate openers (Italy BFT) specialty: www.zitin.com/bft
US HID access control system Shanghai Sales Center:www.zitin.com/hid
Taiwan Tiansuo automatic doors and access control systems Shanghai **: www.zitin.com/tiansuo
For ** products please visit our official website:www.zitin.com/brand or click the brand icons below
  
  
  
Shanghai automatic door maintenance- Zitin Repair & after-sales service Center-Automatic door repair Maintenance and Care Hotline: +86 21 68568185 |
Current Location: Home >